• Tensile Strength: >2900 psi
• Elongation: 43%
• Tear Strength: 593 pli
• Flex Modulus: >75,000 psi
• Abrasion, mg loss/ 1000 cycles: 42
• Water Permeation g/day/m2: 1.49
• Hardness, Shore D: 62-68
• Density -lbs./ ft3: 67.5 lbs./ft3
SprayShield Green 2 is a semi-rigid, 100% solids polyurethane coating which provides chemical resistance for concrete, steel, masonry, fiberglass and other surfaces in municipal, industrial agricultural and maritime applications. SprayShield Green® 2 is formulated for use in wastewater and stormwater environments. SprayShield Green® 2’s also provides a quick curing time* to enable most newly protected structures to be returned to service quickly.
Environmental factors such as freeze/thaw cycling, vibration and seismic activities have no affect on the performance of SprayShield Green 2. SprayShield Green 2 is ideally designed for applications on surfaces that are exposed to acids, corrosives and other caustic elements.
SprayShield Green 2 is applied by utilizing a proprietary heated plural component spray system. A surface temperature of 60°F / 16°C minimum is recommended with 122°F / 50°C maximum for optimum protection.
*potable water applications require greater cure time
Don’t be fooled by meaningless warranty claims. Sprayroq products are all tested and proven effective by unbiased, unaffiliated third parties, in rigorous assessments conducted by an ASTM-approved or industry equivalent testing facility.
Put SprayShield Green 2 to work protecting your infrastructure, when surfaces call for a semi-rigid, chemical-resistant lining.
Call 800.634.0504 Toll-free, or email us your inquiry now
Independent 3rd Party Test Results
ASTM D6886-08 Biobased Content Analysis
ASTM D4060 Taber Abrasion
ASTM D624 Tear Strength
ASTM D638 Tensile Properties
ASTM D790 Flexural Modulus (short term)
ASTM E96 Water Permeation
Certifications and SDS
SDS-A
SDS-B
Product Literature
Sprayroq Brochure – US English
Catalog/Brochure – Chinese
Just fill out this simple form with you name, email, and address so that we can prepare and send a full product sample kit your way! Or alternatively, you can let us know through the information listed below.
p: 205.957.0020
e: info@sprayroq.com
4766 Grantswood Road
Suite 150
Irondale AL 35210